.gitignore

@@ -8,5 +8,3 @@ spell/
 # You can uncomment this yourself if you want to lock the lazy-lock.json,
 # but for kickstart, it makes sense to leave it ignored.
 lazy-lock.json
-
-.DS_Store

.stylua.toml

@@ -4,4 +4,3 @@ indent_type = "Spaces"
 indent_width = 2
 quote_style = "AutoPreferSingle"
 call_parentheses = "None"
-collapse_simple_statement = "Always"

README.md

@@ -17,14 +17,7 @@ A starting point for Neovim that is:
 Kickstart.nvim targets *only* the latest
 ['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest
 ['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim.
-If you are experiencing issues, please make sure you have at least the latest
-stable version. Most likely, you want to install neovim via a [package
-manager](https://github.com/neovim/neovim/blob/master/INSTALL.md#install-from-package).
-To check your neovim version, run `nvim --version` and make sure it is not
-below the latest
-['stable'](https://github.com/neovim/neovim/releases/tag/stable) version. If
-your chosen install method only gives you an outdated version of neovim, find
-alternative [installation methods below](#alternative-neovim-installation-methods).
+If you are experiencing issues, please make sure you have the latest versions.
 
 ### Install External Dependencies
 
@@ -161,7 +154,7 @@ examples of adding popularly requested plugins.
 
 Below you can find OS specific install instructions for Neovim and dependencies.
 
-After installing all the dependencies continue with the [Install Kickstart](#install-kickstart) step.
+After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step.
 
 #### Windows Installation
 
@@ -246,77 +239,3 @@ sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim
 ```
 </details>
 
-### Alternative neovim installation methods
-
-For some systems it is not unexpected that the [package manager installation
-method](https://github.com/neovim/neovim/blob/master/INSTALL.md#install-from-package)
-recommended by neovim is significantly behind. If that is the case for you,
-pick one of the following methods that are known to deliver fresh neovim versions very quickly.
-They have been picked for their popularity and because they make installing and updating
-neovim to the latest versions easy. You can also find more detail about the
-available methods being discussed
-[here](https://github.com/nvim-lua/kickstart.nvim/issues/1583).
-
-
-<details><summary>Bob</summary>
-
-[Bob](https://github.com/MordechaiHadad/bob) is a Neovim version manager for
-all plattforms. Simply install
-[rustup](https://rust-lang.github.io/rustup/installation/other.html),
-and run the following commands:
-
-```bash
-rustup default stable
-rustup update stable
-cargo install bob-nvim
-bob use stable
-```
-
-</details>
-
-<details><summary>Homebrew</summary>
-
-[Homebrew](https://brew.sh) is a package manager popular on Mac and Linux.
-Simply install using [`brew install`](https://formulae.brew.sh/formula/neovim).
-
-</details>
-
-<details><summary>Flatpak</summary>
-
-Flatpak is a package manager for applications that allows developers to package their applications
-just once to make it available on all Linux systems. Simply [install flatpak](https://flatpak.org/setup/)
-and setup [flathub](https://flathub.org/setup) to [install neovim](https://flathub.org/apps/io.neovim.nvim).
-
-</details>
-
-<details><summary>asdf and mise-en-place</summary>
-
-[asdf](https://asdf-vm.com/) and [mise](https://mise.jdx.dev/) are tool version managers,
-mostly aimed towards project-specific tool versioning. However both support managing tools
-globally in the user-space as well:
-
-<details><summary>mise</summary>
-
-[Install mise](https://mise.jdx.dev/getting-started.html), then run:
-
-```bash
-mise plugins install neovim
-mise use neovim@stable
-```
-
-</details>
-
-<details><summary>asdf</summary>
-
-[Install asdf](https://asdf-vm.com/guide/getting-started.html), then run:
-
-```bash
-asdf plugin add neovim
-asdf install neovim stable
-asdf set neovim stable --home
-asdf reshim neovim
-```
-
-</details>
-
-</details>

init.lua

@@ -114,7 +114,9 @@ vim.o.showmode = false
 --  Schedule the setting after `UiEnter` because it can increase startup-time.
 --  Remove this option if you want your OS clipboard to remain independent.
 --  See `:help 'clipboard'`
-vim.schedule(function() vim.o.clipboard = 'unnamedplus' end)
+vim.schedule(function()
+  vim.o.clipboard = 'unnamedplus'
+end)
 
 -- Enable break indent
 vim.o.breakindent = true
@@ -146,7 +148,7 @@ vim.o.splitbelow = true
 --  Notice listchars is set using `vim.opt` instead of `vim.o`.
 --  It is very similar to `vim.o` but offers an interface for conveniently interacting with tables.
 --   See `:help lua-options`
---   and `:help lua-guide-options`
+--   and `:help lua-options-guide`
 vim.o.list = true
 vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
 
@@ -171,22 +173,7 @@ vim.o.confirm = true
 --  See `:help hlsearch`
 vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
 
--- Diagnostic Config & Keymaps
--- See :help vim.diagnostic.Opts
-vim.diagnostic.config {
-  update_in_insert = false,
-  severity_sort = true,
-  float = { border = 'rounded', source = 'if_many' },
-  underline = { severity = vim.diagnostic.severity.ERROR },
-
-  -- Can switch between these as you prefer
-  virtual_text = true, -- Text shows up at the end of the line
-  virtual_lines = false, -- Teest shows up underneath the line, with virtual lines
-
-  -- Auto open the float, so you can easily read the errors when jumping with `[d` and `]d`
-  jump = { float = true },
-}
-
+-- Diagnostic keymaps
 vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
@@ -227,7 +214,9 @@ vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper win
 vim.api.nvim_create_autocmd('TextYankPost', {
   desc = 'Highlight when yanking (copying) text',
   group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
-  callback = function() vim.hl.on_yank() end,
+  callback = function()
+    vim.hl.on_yank()
+  end,
 })
 
 -- [[ Install `lazy.nvim` plugin manager ]]
@@ -236,7 +225,9 @@ local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
 if not (vim.uv or vim.loop).fs_stat(lazypath) then
   local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
   local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
-  if vim.v.shell_error ~= 0 then error('Error cloning lazy.nvim:\n' .. out) end
+  if vim.v.shell_error ~= 0 then
+    error('Error cloning lazy.nvim:\n' .. out)
+  end
 end
 
 ---@type vim.Option
@@ -255,8 +246,15 @@ rtp:prepend(lazypath)
 --
 -- NOTE: Here is where you install your plugins.
 require('lazy').setup({
-  -- NOTE: Plugins can be added via a link or github org/name. To run setup automatically, use `opts = {}`
-  { 'NMAC427/guess-indent.nvim', opts = {} },
+  -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
+  'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatically
+
+  -- NOTE: Plugins can also be added by using a table,
+  -- with the first argument being the link and the following
+  -- keys can be used to configure plugin behavior/loading/etc.
+  --
+  -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded.
+  --
 
   -- Alternatively, use `config = function() ... end` for full control over the configuration.
   -- If you prefer to call `setup` explicitly, use:
@@ -302,15 +300,51 @@ require('lazy').setup({
 
   { -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
-    event = 'VimEnter',
+    event = 'VimEnter', -- Sets the loading event to 'VimEnter'
     opts = {
       -- delay between pressing a key and opening which-key (milliseconds)
+      -- this setting is independent of vim.o.timeoutlen
       delay = 0,
-      icons = { mappings = vim.g.have_nerd_font },
+      icons = {
+        -- set icon mappings to true if you have a Nerd Font
+        mappings = vim.g.have_nerd_font,
+        -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
+        -- default which-key.nvim defined Nerd Font icons, otherwise define a string table
+        keys = vim.g.have_nerd_font and {} or {
+          Up = '<Up> ',
+          Down = '<Down> ',
+          Left = '<Left> ',
+          Right = '<Right> ',
+          C = '<C-…> ',
+          M = '<M-…> ',
+          D = '<D-…> ',
+          S = '<S-…> ',
+          CR = '<CR> ',
+          Esc = '<Esc> ',
+          ScrollWheelDown = '<ScrollWheelDown> ',
+          ScrollWheelUp = '<ScrollWheelUp> ',
+          NL = '<NL> ',
+          BS = '<BS> ',
+          Space = '<Space> ',
+          Tab = '<Tab> ',
+          F1 = '<F1>',
+          F2 = '<F2>',
+          F3 = '<F3>',
+          F4 = '<F4>',
+          F5 = '<F5>',
+          F6 = '<F6>',
+          F7 = '<F7>',
+          F8 = '<F8>',
+          F9 = '<F9>',
+          F10 = '<F10>',
+          F11 = '<F11>',
+          F12 = '<F12>',
+        },
+      },
 
       -- Document existing key chains
       spec = {
-        { '<leader>s', group = '[S]earch', mode = { 'n', 'v' } },
+        { '<leader>s', group = '[S]earch' },
         { '<leader>t', group = '[T]oggle' },
         { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
       },
@@ -326,16 +360,6 @@ require('lazy').setup({
 
   { -- Fuzzy Finder (files, lsp, etc)
     'nvim-telescope/telescope.nvim',
-    -- By default, Telescope is included and acts as your picker for everything.
-
-    -- If you would like to switch to a different picker (like snacks, or fzf-lua)
-    -- you can disable the Telescope plugin by setting enabled to false and enable
-    -- your replacement picker by requiring it explicitly (e.g. 'custom.plugins.snacks')
-
-    -- Note: If you customize your config for yourself,
-    -- it’s best to remove the Telescope plugin config entirely
-    -- instead of just disabling it here, to keep your config clean.
-    enabled = true,
     event = 'VimEnter',
     dependencies = {
       'nvim-lua/plenary.nvim',
@@ -348,7 +372,9 @@ require('lazy').setup({
 
         -- `cond` is a condition used to determine whether this plugin should be
         -- installed and loaded.
-        cond = function() return vim.fn.executable 'make' == 1 end,
+        cond = function()
+          return vim.fn.executable 'make' == 1
+        end,
       },
       { 'nvim-telescope/telescope-ui-select.nvim' },
 
@@ -388,7 +414,9 @@ require('lazy').setup({
         -- },
         -- pickers = {}
         extensions = {
-          ['ui-select'] = { require('telescope.themes').get_dropdown() },
+          ['ui-select'] = {
+            require('telescope.themes').get_dropdown(),
+          },
         },
       }
 
@@ -402,49 +430,14 @@ require('lazy').setup({
       vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
       vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
       vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
-      vim.keymap.set({ 'n', 'v' }, '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
+      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
       vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
       vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
       vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
       vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
-      vim.keymap.set('n', '<leader>sc', builtin.commands, { desc = '[S]earch [C]ommands' })
       vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
 
-      -- This runs on LSP attach per buffer (see main LSP attach function in 'neovim/nvim-lspconfig' config for more info,
-      -- it is better explained there). This allows easily switching between pickers if you prefer using something else!
-      vim.api.nvim_create_autocmd('LspAttach', {
-        group = vim.api.nvim_create_augroup('telescope-lsp-attach', { clear = true }),
-        callback = function(event)
-          local buf = event.buf
-
-          -- Find references for the word under your cursor.
-          vim.keymap.set('n', 'grr', builtin.lsp_references, { buffer = buf, desc = '[G]oto [R]eferences' })
-
-          -- Jump to the implementation of the word under your cursor.
-          -- Useful when your language has ways of declaring types without an actual implementation.
-          vim.keymap.set('n', 'gri', builtin.lsp_implementations, { buffer = buf, desc = '[G]oto [I]mplementation' })
-
-          -- Jump to the definition of the word under your cursor.
-          -- This is where a variable was first declared, or where a function is defined, etc.
-          -- To jump back, press <C-t>.
-          vim.keymap.set('n', 'grd', builtin.lsp_definitions, { buffer = buf, desc = '[G]oto [D]efinition' })
-
-          -- Fuzzy find all the symbols in your current document.
-          -- Symbols are things like variables, functions, types, etc.
-          vim.keymap.set('n', 'gO', builtin.lsp_document_symbols, { buffer = buf, desc = 'Open Document Symbols' })
-
-          -- Fuzzy find all the symbols in your current workspace.
-          -- Similar to document symbols, except searches over your entire project.
-          vim.keymap.set('n', 'gW', builtin.lsp_dynamic_workspace_symbols, { buffer = buf, desc = 'Open Workspace Symbols' })
-
-          -- Jump to the type of the word under your cursor.
-          -- Useful when you're not sure what type a variable is and you want to see
-          -- the definition of its *type*, not where it was *defined*.
-          vim.keymap.set('n', 'grt', builtin.lsp_type_definitions, { buffer = buf, desc = '[G]oto [T]ype Definition' })
-        end,
-      })
-
-      -- Override default behavior and theme when searching
+      -- Slightly advanced example of overriding default behavior and theme
       vim.keymap.set('n', '<leader>/', function()
         -- You can pass additional configuration to Telescope to change the theme, layout, etc.
         builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
@@ -455,24 +448,33 @@ require('lazy').setup({
 
       -- It's also possible to pass additional configuration options.
       --  See `:help telescope.builtin.live_grep()` for information about particular keys
-      vim.keymap.set(
-        'n',
-        '<leader>s/',
-        function()
+      vim.keymap.set('n', '<leader>s/', function()
         builtin.live_grep {
           grep_open_files = true,
           prompt_title = 'Live Grep in Open Files',
         }
-        end,
-        { desc = '[S]earch [/] in Open Files' }
-      )
+      end, { desc = '[S]earch [/] in Open Files' })
 
       -- Shortcut for searching your Neovim configuration files
-      vim.keymap.set('n', '<leader>sn', function() builtin.find_files { cwd = vim.fn.stdpath 'config' } end, { desc = '[S]earch [N]eovim files' })
+      vim.keymap.set('n', '<leader>sn', function()
+        builtin.find_files { cwd = vim.fn.stdpath 'config' }
+      end, { desc = '[S]earch [N]eovim files' })
     end,
   },
 
   -- LSP Plugins
+  {
+    -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
+    -- used for completion, annotations and signatures of Neovim apis
+    'folke/lazydev.nvim',
+    ft = 'lua',
+    opts = {
+      library = {
+        -- Load luvit types when the `vim.uv` word is found
+        { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
+      },
+    },
+  },
   {
     -- Main LSP Configuration
     'neovim/nvim-lspconfig',
@@ -481,6 +483,7 @@ require('lazy').setup({
       -- Mason must be loaded before its dependents so we need to set it up here.
       -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
       { 'mason-org/mason.nvim', opts = {} },
+      'mason-org/mason-lspconfig.nvim',
       'WhoIsSethDaniel/mason-tool-installer.nvim',
 
       -- Useful status updates for LSP.
@@ -540,17 +543,42 @@ require('lazy').setup({
           -- or a suggestion from your LSP for this to activate.
           map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' })
 
+          -- Find references for the word under your cursor.
+          map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+
+          -- Jump to the implementation of the word under your cursor.
+          --  Useful when your language has ways of declaring types without an actual implementation.
+          map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+
+          -- Jump to the definition of the word under your cursor.
+          --  This is where a variable was first declared, or where a function is defined, etc.
+          --  To jump back, press <C-t>.
+          map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+
           -- WARN: This is not Goto Definition, this is Goto Declaration.
           --  For example, in C this would take you to the header.
           map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
 
+          -- Fuzzy find all the symbols in your current document.
+          --  Symbols are things like variables, functions, types, etc.
+          map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols')
+
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
+          map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols')
+
+          -- Jump to the type of the word under your cursor.
+          --  Useful when you're not sure what type a variable is and you want to see
+          --  the definition of its *type*, not where it was *defined*.
+          map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition')
+
           -- The following two autocommands are used to highlight references of the
           -- word under your cursor when your cursor rests there for a little while.
           --    See `:help CursorHold` for information about when this is executed
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client:supports_method('textDocument/documentHighlight', event.buf) then
+          if client and client:supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then
             local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
@@ -577,12 +605,43 @@ require('lazy').setup({
           -- code, if the language server you are using supports them
           --
           -- This may be unwanted, since they displace some of your code
-          if client and client:supports_method('textDocument/inlayHint', event.buf) then
-            map('<leader>th', function() vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) end, '[T]oggle Inlay [H]ints')
+          if client and client:supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then
+            map('<leader>th', function()
+              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
+            end, '[T]oggle Inlay [H]ints')
           end
         end,
       })
 
+      -- Diagnostic Config
+      -- See :help vim.diagnostic.Opts
+      vim.diagnostic.config {
+        severity_sort = true,
+        float = { border = 'rounded', source = 'if_many' },
+        underline = { severity = vim.diagnostic.severity.ERROR },
+        signs = vim.g.have_nerd_font and {
+          text = {
+            [vim.diagnostic.severity.ERROR] = '󰅚 ',
+            [vim.diagnostic.severity.WARN] = '󰀪 ',
+            [vim.diagnostic.severity.INFO] = '󰋽 ',
+            [vim.diagnostic.severity.HINT] = '󰌶 ',
+          },
+        } or {},
+        virtual_text = {
+          source = 'if_many',
+          spacing = 2,
+          format = function(diagnostic)
+            local diagnostic_message = {
+              [vim.diagnostic.severity.ERROR] = diagnostic.message,
+              [vim.diagnostic.severity.WARN] = diagnostic.message,
+              [vim.diagnostic.severity.INFO] = diagnostic.message,
+              [vim.diagnostic.severity.HINT] = diagnostic.message,
+            }
+            return diagnostic_message[diagnostic.severity]
+          end,
+        },
+      }
+
       -- LSP servers and clients are able to communicate to each other what features they support.
       --  By default, Neovim doesn't support everything that is in the LSP specification.
       --  When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities.
@@ -591,18 +650,41 @@ require('lazy').setup({
 
       -- Enable the following language servers
       --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
-      --  See `:help lsp-config` for information about keys and how to configure
+      --
+      --  Add any additional override configuration in the following tables. Available keys are:
+      --  - cmd (table): Override the default command used to start the server
+      --  - filetypes (table): Override the default list of associated filetypes for the server
+      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
+      --  - settings (table): Override the default settings passed when initializing the server.
+      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
         -- clangd = {},
         -- gopls = {},
         -- pyright = {},
         -- rust_analyzer = {},
+        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
         --
         -- Some languages (like typescript) have entire language plugins that can be useful:
         --    https://github.com/pmizio/typescript-tools.nvim
         --
         -- But for many setups, the LSP (`ts_ls`) will work just fine
         -- ts_ls = {},
+        --
+
+        lua_ls = {
+          -- cmd = { ... },
+          -- filetypes = { ... },
+          -- capabilities = {},
+          settings = {
+            Lua = {
+              completion = {
+                callSnippet = 'Replace',
+              },
+              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
+              -- diagnostics = { disable = { 'missing-fields' } },
+            },
+          },
+        },
       }
 
       -- Ensure the servers and tools above are installed
@@ -612,47 +694,32 @@ require('lazy').setup({
       --    :Mason
       --
       -- You can press `g?` for help in this menu.
+      --
+      -- `mason` had to be setup earlier: to configure its options see the
+      -- `dependencies` table for `nvim-lspconfig` above.
+      --
+      -- You can add other tools here that you want Mason to install
+      -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
-        'lua_ls', -- Lua Language server
         'stylua', -- Used to format Lua code
-        -- You can add other tools here that you want Mason to install
       })
-
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
-      for name, server in pairs(servers) do
+      require('mason-lspconfig').setup {
+        ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer)
+        automatic_installation = false,
+        handlers = {
+          function(server_name)
+            local server = servers[server_name] or {}
+            -- This handles overriding only values explicitly passed
+            -- by the server configuration above. Useful when disabling
+            -- certain features of an LSP (for example, turning off formatting for ts_ls)
             server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
-        vim.lsp.config(name, server)
-        vim.lsp.enable(name)
-      end
-
-      -- Special Lua Config, as recommended by neovim help docs
-      vim.lsp.config('lua_ls', {
-        on_init = function(client)
-          if client.workspace_folders then
-            local path = client.workspace_folders[1].name
-            if path ~= vim.fn.stdpath 'config' and (vim.uv.fs_stat(path .. '/.luarc.json') or vim.uv.fs_stat(path .. '/.luarc.jsonc')) then return end
-          end
-
-          client.config.settings.Lua = vim.tbl_deep_extend('force', client.config.settings.Lua, {
-            runtime = {
-              version = 'LuaJIT',
-              path = { 'lua/?.lua', 'lua/?/init.lua' },
-            },
-            workspace = {
-              checkThirdParty = false,
-              -- NOTE: this is a lot slower and will cause issues when working on your own configuration.
-              --  See https://github.com/neovim/nvim-lspconfig/issues/3189
-              library = vim.api.nvim_get_runtime_file('', true),
-            },
-          })
+            require('lspconfig')[server_name].setup(server)
           end,
-        settings = {
-          Lua = {},
         },
-      })
-      vim.lsp.enable 'lua_ls'
+      }
     end,
   },
 
@@ -663,7 +730,9 @@ require('lazy').setup({
     keys = {
       {
         '<leader>f',
-        function() require('conform').format { async = true, lsp_format = 'fallback' } end,
+        function()
+          require('conform').format { async = true, lsp_format = 'fallback' }
+        end,
         mode = '',
         desc = '[F]ormat buffer',
       },
@@ -708,7 +777,9 @@ require('lazy').setup({
           -- Build Step is needed for regex support in snippets.
           -- This step is not supported in many windows environments.
           -- Remove the below condition to re-enable on windows.
-          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then return end
+          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
+            return
+          end
           return 'make install_jsregexp'
         end)(),
         dependencies = {
@@ -724,6 +795,7 @@ require('lazy').setup({
         },
         opts = {},
       },
+      'folke/lazydev.nvim',
     },
     --- @module 'blink.cmp'
     --- @type blink.cmp.Config
@@ -769,7 +841,10 @@ require('lazy').setup({
       },
 
       sources = {
-        default = { 'lsp', 'path', 'snippets' },
+        default = { 'lsp', 'path', 'snippets', 'lazydev' },
+        providers = {
+          lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 },
+        },
       },
 
       snippets = { preset = 'luasnip' },
@@ -814,7 +889,7 @@ require('lazy').setup({
   { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
 
   { -- Collection of various small independent plugins/modules
-    'nvim-mini/mini.nvim',
+    'echasnovski/mini.nvim',
     config = function()
       -- Better Around/Inside textobjects
       --
@@ -842,23 +917,38 @@ require('lazy').setup({
       -- default behavior. For example, here we set the section for
       -- cursor location to LINE:COLUMN
       ---@diagnostic disable-next-line: duplicate-set-field
-      statusline.section_location = function() return '%2l:%-2v' end
+      statusline.section_location = function()
+        return '%2l:%-2v'
+      end
 
       -- ... and there is more!
-      --  Check out: https://github.com/nvim-mini/mini.nvim
+      --  Check out: https://github.com/echasnovski/mini.nvim
     end,
   },
-
   { -- Highlight, edit, and navigate code
     'nvim-treesitter/nvim-treesitter',
-    config = function()
-      local filetypes = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' }
-      require('nvim-treesitter').install(filetypes)
-      vim.api.nvim_create_autocmd('FileType', {
-        pattern = filetypes,
-        callback = function() vim.treesitter.start() end,
-      })
-    end,
+    build = ':TSUpdate',
+    main = 'nvim-treesitter.config', -- Sets main module to use for opts
+    -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+    opts = {
+      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
+      -- Autoinstall languages that are not installed
+      auto_install = true,
+      highlight = {
+        enable = true,
+        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
+        --  If you are experiencing weird indenting issues, add the language to
+        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
+        additional_vim_regex_highlighting = { 'ruby' },
+      },
+      indent = { enable = true, disable = { 'ruby' } },
+    },
+    -- There are additional nvim-treesitter modules that you can use to interact
+    -- with nvim-treesitter. You should go explore a few and see what interests you:
+    --
+    --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+    --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+    --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
   },
 
   -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the

lua/kickstart/health.lua

@@ -12,7 +12,7 @@ local check_version = function()
     return
   end
 
-  if vim.version.ge(vim.version(), '0.11') then
+  if vim.version.ge(vim.version(), '0.10-dev') then
     vim.health.ok(string.format("Neovim version is: '%s'", verstr))
   else
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))

lua/kickstart/plugins/debug.lua

@@ -28,38 +28,52 @@ return {
     -- Basic debugging keymaps, feel free to change to your liking!
     {
       '<F5>',
-      function() require('dap').continue() end,
+      function()
+        require('dap').continue()
+      end,
       desc = 'Debug: Start/Continue',
     },
     {
       '<F1>',
-      function() require('dap').step_into() end,
+      function()
+        require('dap').step_into()
+      end,
       desc = 'Debug: Step Into',
     },
     {
       '<F2>',
-      function() require('dap').step_over() end,
+      function()
+        require('dap').step_over()
+      end,
       desc = 'Debug: Step Over',
     },
     {
       '<F3>',
-      function() require('dap').step_out() end,
+      function()
+        require('dap').step_out()
+      end,
       desc = 'Debug: Step Out',
     },
     {
       '<leader>b',
-      function() require('dap').toggle_breakpoint() end,
+      function()
+        require('dap').toggle_breakpoint()
+      end,
       desc = 'Debug: Toggle Breakpoint',
     },
     {
       '<leader>B',
-      function() require('dap').set_breakpoint(vim.fn.input 'Breakpoint condition: ') end,
+      function()
+        require('dap').set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+      end,
       desc = 'Debug: Set Breakpoint',
     },
     -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
     {
       '<F7>',
-      function() require('dapui').toggle() end,
+      function()
+        require('dapui').toggle()
+      end,
       desc = 'Debug: See last session result.',
     },
   },

lua/kickstart/plugins/gitsigns.lua

@@ -34,8 +34,12 @@ return {
 
         -- Actions
         -- visual mode
-        map('v', '<leader>hs', function() gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' } end, { desc = 'git [s]tage hunk' })
-        map('v', '<leader>hr', function() gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' } end, { desc = 'git [r]eset hunk' })
+        map('v', '<leader>hs', function()
+          gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'git [s]tage hunk' })
+        map('v', '<leader>hr', function()
+          gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'git [r]eset hunk' })
         -- normal mode
         map('n', '<leader>hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' })
         map('n', '<leader>hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' })
@@ -45,7 +49,9 @@ return {
         map('n', '<leader>hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' })
         map('n', '<leader>hb', gitsigns.blame_line, { desc = 'git [b]lame line' })
         map('n', '<leader>hd', gitsigns.diffthis, { desc = 'git [d]iff against index' })
-        map('n', '<leader>hD', function() gitsigns.diffthis '@' end, { desc = 'git [D]iff against last commit' })
+        map('n', '<leader>hD', function()
+          gitsigns.diffthis '@'
+        end, { desc = 'git [D]iff against last commit' })
         -- Toggles
         map('n', '<leader>tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' })
         map('n', '<leader>tD', gitsigns.preview_hunk_inline, { desc = '[T]oggle git show [D]eleted' })

lua/kickstart/plugins/lint.lua

@@ -50,7 +50,9 @@ return {
           -- Only run the linter in buffers that you can modify in order to
           -- avoid superfluous noise, notably within the handy LSP pop-ups that
           -- describe the hovered symbol using Markdown.
-          if vim.bo.modifiable then lint.try_lint() end
+          if vim.bo.modifiable then
+            lint.try_lint()
+          end
         end,
       })
     end,